Skip to Content
FAQ and troubleshooting

FAQ and troubleshooting

How do I connect to a different Wi-Fi network?

Hold the wheel to open the menu → Settings → Wi-Fi setup, or say “set up Wi-Fi again”. The device opens the Bap-XXXX hotspot; join it with your phone and pick the new network at http://192.168.4.1. You can also add networks in the web settings (System tab) while still connected.

The screen says to check the network

The device keeps retrying. Check that your router is on 2.4 GHz (the ESP32-S3 has no 5 GHz) and that the saved password is right.

“Gemini rejected the session”

The key is missing, wrong or out of quota. Open http://bap-xxxx.local → System → Gemini and paste a new key. With a paid fallback key the device switches by itself.

It does not hear the wake word

Say “Hi Lili” clearly, about a metre away. Quiet nights turns the wake word off from 22:00 to 06:00; press the wheel or double-tap the screen instead.

It is too loud at night

Night mode (on by default) caps the volume at 35% from 22:00 to 06:00. Turn the wheel while it talks, or set the volume in the menu or the web settings.

I forgot the settings password

Hold the wheel for 20 seconds: the device resets all settings to defaults (Wi-Fi, key and password included).

How do I stop the music?

Double-tap the screen, say “stop the music”, or press Stop in the web settings.

Can I go back to the original firmware?

Yes. firmware/restore_stock.sh writes back your full backup. Without one, reinstall SenseCraft with Seeed’s tools; the factory keys at 0x9000 are untouched.

Can I use it away from home?

The settings page is LAN-only by design. Use a VPN such as Tailscale or WireGuard to reach your home network; do not expose the device to the Internet.

Where are the logs?

Connect USB and open the serial port at 115200 baud, or use the conversation log in the Chat tab. /api/perf shows CPU, memory and Wi-Fi health.